CPR Systems Online Four Benefits To Choosing A Close-Loop Metal Phosphating Method (outdoor animals)
No commentsBy Toan Dinh
If your company isn’t using the latest, most environmentally-sound method of high pressure spray way phosphating, you’re running the risk of losing out to the competition. And make no mistake about it - in todays super-competitive environment, it’s essential that you stay ahead of the curve. Quite frankly, for many businesses, that equates to consistently adopting a green mentality for everything from the disposal of paper to how metal is prepped to apply paint.
Below, we’ve outlined four benefits to choosing an environmental metal phosphating method over a traditional one. Check them out and be prepared to be surprised at the advantages that the next generation of metal cleaning equipment can bring to your and your organization.
1. Zero Water Discharge:
Wouldnt it be great if you didnt have to worry about all the gritty, grimy and chemical-laden wash water that accompanies traditional methods of washing and phosphating metal products? With a closed-looped phosphating system, such as one from CPR Systems, youll never have to worry about how to get rid of dirty water. Thats because the unique system recycles wash water effortlessly and completely, enabling you to reuse the cleaned wash water chemical bath.
2. Increased Paint Adhesion:
Have you ever had paint almost immediately flake or peel off of poorly-prepped metal parts? It’s completely annoying, not to mention a waste of time, manpower and money. The next time you need to apply some paint to a metal part, choose a paint pretreatment method that’s environmentally-friendly and amazingly efficient. That’s why the CPR System is its industry leader, you clean and phosphate your metal products in one spray wand process.
3. Decrease workplace production times:
Typical metal prep methods are slow and sometime dangerous practices. From dirty, flammable wash rags to explosive solvent and environmental unfriendly cleaning methods the past metal prep methods were expensive endeavors. The CPR Systems spray wand cleaning method reduced the time labored in cleaning metal than has been traditionally needed. That means that your workers will be able to maximize the 8 (or more) hours per day that theyre on your payroll. And that efficiency will gradually build up, eventually becoming noticeable on your bottom line.
4. Green is not just a slogan:
Green is more than a buzzword in todays marketplace, it can mean the difference between snagging a lucrative contract or losing it to a competitor. The CPR Systems closed-looped recycling equipment will eliminate EPA Monitor because there is no dumping of harmful chemicals.
Dont allow your company to languish, lost at the proverbial back of the pack. Adopt a green way of phosphatizing today and reap the rewards that your business deserves. Its one of the best ways to ensure that your organization will be around tomorrow.
For more information, visit CPRSystemsOnline.
CPR Systems Online is the leader in high pressure spray wand phosphatising with waste water recycling for metal & paint pre-treatment. For more information, visit CPRSystemsOnline.com
CPR Systems Online - The Next Generation Of Paint Pretreatment And Metal Cleaning
By Toan Dinh
You may be asking yourself the question: “Is all paint pretreatment and metal cleaning equipment the same?” The answer is a resounding: “Not on your life!”
The next generation of pretreatment and cleaning products for metal parts is completely different than anything youve experienced. In this article, well explain how The CPR Systems spray wand cleaning method with recycling leaves past cleaning processes in the dust!
Unique Wash Water Recycling:
The CPR Systems metal cleaning equipment has the advantage of being a closed-loop, environmentally-friendly, cleaning method meaning that wash water and chemical cleaner / phosphate is recycled instead of having to be discharge of it after each wash. Thus, any organization is now able to conserve water, eliminate EPA permitting and monitoring and reclaim their chemical cleaning all in the process of prepping their metal products before paint.
Reclaim Your Chemical Cleaner For Reuse:
The CPR System recycling equipment recycles at a rate of 20 Gallons a minute. Removing dirt, oils and suspended solids to a size of 20 micron or smaller the chemical cleaner and phosphate is left in the water and is ready for reuse. This eliminates about 80% of cost associated with chemical overhead compared to typical wash and dump methods.
Increased Paint Adhesion:
Have you had problems with poor paint adhesion? Do you find flaking and paint chipping in the corners of your metal parts due to poor metal pretreatment before paint. The CPR System eliminates a lot of the headaches associated with cleaning large metal products by using a spray wand cleaning method. This method is quick and efficient. Washing the metal products at pressures of 3,000 PSI the cleaner and phosphate clean corners and welding smut with ease all while leaving a thin phosphate coating behind for better paint adhesion.
Completely Prepped Paint Surface:
Metal doesnt typically “like” paint; therefore, it must be prepped before industrial paint such as that from Sherwin Williams, PPG Industrial or Valspar can be applied. Todays unique paint pretreatment methods can ensure a perfectly prepped surface on your metal parts.
Decreased Labor:
How many hours do your workers currently spend preparing your metal products? Chances are that when it needs to be done, it takes some time. Thats another way the CPR Systems cleaning method is superior to typical wash and dump methods.
14 Day No Flash Rust Guarantee:
No company that deals with metal parts wants to have to incur the costs associated with flash rusting. Thats why todays models of phosphatizing equipment, such as that available through CPR Systems, are so thorough. After all, only the best will do for your and your organization. CPR System offers a 14 day no flash rust guarantee at 50% humidity. The phosphate coating in their chemical cleaner / phosphate Phosbite 101 helps fight corrosion and flash rusting.
Dont hesitate another day - look into the next generation of phosphatizing equipment right now. Youll never regret taking the step.
For more information, visit CPRSystemsOnline.
CPR Systems Online is the leader in high pressure spray wand phosphatising with waste water recycling for metal & paint pre-treatment. For more information, visit CPRSystemsOnline.com
Learn About Outdoor Creatures In Wildlife
CPR Systems Online - How To Finance The Best Metal Cleaning Equipment Available
By Toan Dinh
If youre a business owner who manufactures metal products with a finish coat of paint you are well aware of your need to acquire top quality paint finish to eliminate quality control callbacks. After all, you know that your paint quality is only as good as your paints ability to correctly stick to the metal product. So you expect when you invest in state-of-the-art metal pre-treatment equipment, to get terrific results in less time With the CPR Metal Pretreatment System you will save money, lower your production costs, and eliminate quality control callbacks due to poor paint adhesion. However, with todays economic issues at the forefront, you may also be considering how to afford the best metal cleaning products available.
Below, weve outlined four great ways for you to maximize your assets and enable you to phosphatize the most efficient way possible. Although your situation will, of course, be unique to your industry and needs, we encourage you to consider these methods of obtaining the equipment you, your colleagues and your customers deserve.
1. Take Out a Business Loan through a Bank or Other Lending Institution:
If your credit is in good standing, you may be wise to take out a business loan to pay for your metal cleaning equipment. And if you choose an environmentally-safe metal cleaning model, such as one from CPR Systems, you may be able to get a break for choosing a green alternative. (This break could come in a number of forms, including carbon credits depending upon the industry in which you work.)
2. Pay for the Equipment in Cash:
Theres nothing wrong with using old-fashioned cash to pay for your phosphatizing equipment. If you have enough on hand and can afford to dip into your savings (or other account), you may want to consider it. That way, you wont have to pay any interest on bank loans. In the long run, when you consider the savings youll be getting in return for using a highly efficient metal washing system, you may regain your investment monies quite quickly.
3. Pay for the equipment with the money you save:
If you are currently using four drums of phosphate per month we would reduce your usage to less than one. The money saved could be used to pay for the lease to own option on the equipment.
4. Ask the Metal Cleaning Equipment Company about Payment Options:
Many metal cleaning equipment sellers offer special payment options to businesses that wish to buy their products. Even if they dont talk about payment options on their websites, theres nothing wrong with giving them a phone call. After all, youre not losing anything by asking the question. And if the answer is a great one, you may just have saved yourself incredible time and money in the future.
Make no mistake - your competitors are using the best metal cleaning equipment they can, and theyre most likely touting that fact to customers. Dont be left behind. If you want to stay in the game, you can. Just be savvy and explore all your financing options.
For more information, visit CPRSystemsOnline.
CPR Systems Online is the leader in high pressure spray wand phosphatising with waste water recycling for metal & paint pre-treatment. For more information, visit CPRSystemsOnline.com
Saturday, January 30th, 2010 at 12:45 pm and is filed under environmental. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
